LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 2000 >> Z8 >> Repair and Diagnosis >> Engine Performance >> Engine Controls - On-Vehicle Adjustments >> Engine Mechanical >> Engine Compression >> 6-Cylinder & V8
April 5, 2026: LEMON Manuals is launched! Read the announcement.

6-Cylinder & V8

  1. Deactivate fuel injection system by removing Digital Motor Electronics (DME) master relay and fuel pump relay before performing compression test. Ensure battery is fully charged.
  2. Ensure engine coolant temperature does not exceed 86°F (30°C). Remove oil filler cap. Remove 2 nut covers and nuts securing cylinder head cover(s). Remove cylinder head cover(s). Disconnect ignition coil connectors.
  3. Remove ignition coils. Using 16-mm Socket (12-1-171) and Torque Limiter (12-1-172), remove spark plugs. Use Pressure Gauge (11-0-162), Test Adapter (11-0-166) and Tube Extension (11-0-167) to check compression pressure. See COMPRESSION SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals