Service Precautions

Observe the following precautions when working on or around AIRBAG systems:

1. When working around steering column and before any repairs are performed, disable SRS. See appropriate AIR BAG RESTRAINT SYSTEMS article.
2. Always ensure the radio is off before disconnecting battery. This will prevent damage to radio microprocessor.
3. Before performing any body damage straightening or electrical arc-welding, disable SRS. See appropriate AIR BAG RESTRAINT SYSTEMS article. Disconnect front sensors.
4. Wait at least 5 seconds after SRS is disabled before servicing system as system maintains SRS voltage at least that long. Servicing SRS before waiting period may cause accidental AIRBAG deployment and personal injury.
5. Always wear safety glasses and gloves when handling a deployed AIRBAG module. AIRBAG module may contain sodium hydroxide deposits which are irritating to the skin.
6. Never use any SRS component that has been dropped from 3 feet or more.
7. To avoid AIRBAG deployment when trouble shooting SRS, DO NOT use self-powered electrical test equipment such as battery-powered or AC-powered voltmeter, ohmmeter, etc. DO NOT perform any repair on any portion of SRS wiring circuit.
8. Always handle AIRBAG module with trim cover away from your body. Always place AIRBAG module on workbench with trim cover up, away from loose objects.
9. Never expose SRS components to temperatures greater than 212°F (100°C).
10. Never expose any SRS system components to cleaning agents such as solvents, gasoline, lye, etc.