LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 2002 >> 330i Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine - Repair (6-CYL) >> Engine General >> Remove and Install Engine Cover
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remove and Install Engine Cover

E60, E61 only: 

To remove cover of fuel injectors: Necessary preliminary tasks:  Remove microfilter housing lower sections on left and right. Unclip wiring harness sections (1) from cable holder (3). Lever out expansion rivets (2). Remove cable holder (3) from tension struts in direction of arrow.

Fig 1: Unclip Wiring Harness Sections, Cable Holder, Expansion Rivets & Cable Holder
G00535211Courtesy of BMW OF NORTH AMERICA, INC.

All models: 

Unclip cover caps from screws and release screws. Remove cover for fuel injectors.

Fig 2: Unclip cover caps from screws and release screws
G00535212Courtesy of BMW OF NORTH AMERICA, INC.

Unclip cover caps from screws and release screws. Remove sealing cap (1). Remove cover from ignition coil cover. Screw cap (1) back into cylinder head cover.

Fig 3: Remove Sealing Cap
G00535213Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals