Pinion Drive

The Pinion Drive gear is attached to the roller-type overrunning clutch which is splined via a helical shaft to the starter armature. At rest the spring pressure in the overrunning clutch wedge rollers between the pinion shaft and the clutch hub race. This locks the pinion to the clutch. During start-up the clutch and pinion rotate as one.

As the engine speed exceeds starter speed, the pinion pushes the rollers, against the spring pressure, into a wider area. This movement of the rollers allow the pinion to turn independently of the starter armature, not causing the armature to overspeed.

When the solenoid windings are released the clutch assembly is pulled away from the flywheel through spring pressure.