Principle of Operation: Functions: Telephone

The following functions are available for voice control of the telephone:

• "PIN input" - The user can enter the PIN number of the telephone card by voice.
• "Switch telephone on" - The telephone can be activated by voice.
• "Dial number" - The user can enter any telephone number by voice. If the number is completely detected, the dial-up process is started by voice command.
• "Store names" (internal to the SVS) - The user can associate names and telephone numbers by a dialog and enter them into the phone book in the SVS. The entries are made in sequence. The overall memory capacity is 100 names. When you store names by voice, make sure that a sample comparison is made with the names already stored in the phone book.
• "Select names" - The names stored in the SVS internal phone book can be addressed by voice. The corresponding phone number is then transmitted to the phone and the connection is established.
• "Dial repeat" - This functions repeats the last number dialed.
• "Display list of SMS / E-mails" (planned) - This function displays a list of all SMS (Short Message Service) received by the telephone on the Control Display.
• "Read phone book" (SVS internal) - The phone book inside the SVS is read sequentially. You can jump back and forth in the phone book by voice commands. The user can use a voice command to select the entry which has just been read from the phone book. Then the telephone connection is established.
• "Delete a phone book entry" (SVS internal) - The user can delete a single entry from the phone book. By voice, the user must enter the name corresponding to the entry to be deleted. For security reasons, the user must confirm it before the entry is really deleted.
• "Delete a phone book" (SVS internal) - The user can delete all entries in the directory. For security reasons, the user must confirm it before the entry is actually deleted.