| w/o Sequential Manual Gearbox | | 7.9 | 5.8 | C |
| w/Sequential Manual Gearbox | | 9.9 | 7.3 | C |
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: |
| | 0.7 | | C |
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 1.0 | | C |
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: |
| | 0.5 | | B |
| Combination Procedure: OUTPUT FLANGE SEAL: Remove & Replace: |
| | 0.5 | | B |
| Combination Procedure: REAR OIL SEAL OR DRIVE FLANGE: Remove & Replace: |
| | 1.3 | | B |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.4 | | C |