With Progman (CIP15.0)
CIP INFORMATION WITH PROGMAN (CIP 15.0)
| Device | # of MOST-bus equipped Vehicles able to be Programmed at one time | # Vehicles able to be Diagnosed while another is being Programmed |
|---|---|---|
| GT1 | 0 | 1 |
| GT1 | 0 | 1 |
| DISplus | 0 | 1 |
| SSS | 5 | 0 |
| TOTAL | 5 | 3 |
By installing CIP 15.0 on all of the GT1's and SSS's, Progman can be accessed via any GT1 or SSS but is controlled/operated by the Software Service Station (SSS) only. Since the SSS controls/runs Progman, it will be the only device able to code and program vehicles, the GT1 will be viewed as a remote terminal for Progman.
With the introduction of Progman, parallel programming of up to five vehicles can be performed. The vehicles to be programmed do not need to be the same model series nor have the same data status or be connected at the same time.