Vehicle - Initialization

The "Initialization"  function provides access to three different functions:

• Start system time - Used to synchronize all modules contained on the vehicles byteflight bus.
• Delete fault memory
• CAS or EWS calibration
  Fig 1: Selecting Initialization Button

  Courtesy of BMW OF NORTH AMERICA, INC.

By selecting "Delete fault memory"  the fault memory of all installed control modules will be cleared.

Fig 2: Selecting Delete Fault Memory Button

Courtesy of BMW OF NORTH AMERICA, INC.

Displays a report pertaining to the clearing of the fault memory on all installed modules.

Fig 3: Display Final Report

Courtesy of BMW OF NORTH AMERICA, INC.

By selecting "EWS adjustm."  or "CAS Calibration" the rolling code tables can be initialized.

Fig 4: Selecting EWS Adjustment Button

Courtesy of BMW OF NORTH AMERICA, INC.

By selecting "Yes"  the calibration/initialization of the rolling code tables in the DME and CAS or EWS modules will be carried out.

Fig 5: Selecting YES Button

Courtesy of BMW OF NORTH AMERICA, INC.