11 0 091 Installing Replacement Engine (S85)
Necessary preliminary tasks:
- Remove and install engine .
NOTE:
Use a 5W-30
engine oil for the running-in procedure in a replacement engine.
Running-in engine oil must be changed at 2000 km for a 10W-60 engine oil incl. engine oil filter.
Running-in engine oil must be changed at 2000 km for a 10W-60 engine oil incl. engine oil filter.
Installation:
Modifying check valves, refer to memory entries in DME.
In engines where it is not possible to connect check valves, replace the vacuum-controlled check valves with self-opening check valves.
Vacuum lines will then no longer be required.