12 90 Control Unit Housing
TIGHTENING TORQUE SPECIFICATION - CONTROL UNIT HOUSING
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Assembly of upper and lower sections | E32/E34/E36 | - | - | 5 Nm |
| 2AZ Center section to body | E32/E34 | - | - | 3 Nm |
| 3AZ Control unit holder in E box | E36 | - | - | 5 Nm |
| 4AZ Control unit box cover | E38/E39/E52 | - | - | 4 Nm |
| - | E46 | - | - | 6 Nm |
| - | E53/E36/7/ E54 | - | - | 3 Nm |
| 5AZ Electronics box to firewall | E65 | Plastic screw | - | 6 Nm |