Progman Introduction: Multiconsole/Multisession
Since the SSS is the primary Coding and Programming system, coding and programming tasks can be "transferred" to the SSS from any GT1 located on the workshop network. In order to monitor the tasks assigned to a specific SSS a menu of active jobs is displayed via Progman and can be accessed by any GT1 or SSS on the network.
MULTICONSOLE/MULTISESSION FUNCTION
| Multiconsole | The multiconsole function makes it possible to control programming procedures both via the Software Service Station as well as via the BMW diagnosis systems GT1. |
| Multisession | The multisession function makes it possible to program several vehicles simultaneously. |
This function allows the GT1 to be remote terminals for the SSS with respect to Coding and Programming and once a task is transferred to an available SSS, the GT1 can be used to diagnose another vehicle and/or transfer another coding/programming task to an SSS.