Section 2602 (Fuel System - Repair)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
- Checking/Setting Engine/Emission
- Fuel Pump With Drive And Line
- Fuel Filter
- Injection Pump, Regulator, Mixture Regulator
- 13 51 017 Removing and installing/replacing high-pressure pump (N20, N26)
- 13 51 017 Removing and installing/replacing high pressure pump (Bosch) (N55)
- 13 51 017 Removing and installing/replacing high pressure pump (Continental) (N55)
- 13 51 004 Removing and installing/replacing high pressure pump (N47 D20 O1)
- 13 53 192 Removing and installing/replacing a pressure line (Continental high-pressure pump) (N55)
- 13 53 332 Removing and installing/replacing feed line (Bosch high pressure pump) (N55)
- 13 53 332 Removing and installing/replacing feed line (Continental high pressure pump) (N55)
- 13 53 334 Removing and installing/replacing pressure line (Bosch high-pressure pump) (N55)
- 13 53 334 Removing and installing/replacing pressure line (Continental high pressure pump) (N55)
- 13 53 158 Removing and installing/replacing rail (Bosch high pressure pump) (N55)
- 13 53 158 Removing and installing/replacing rail (Continental high-pressure pump) (N55)
- 13 53 596 Replacing high-pressure fuel sensor (N55)
- Injection Nozzle And Lines
- 13 53... Remove, install replace one injector N55 as from engine number 14407685 (hold-down device concept at the top)
- 13 53 310 Removing and installing or replacing an injector (N20, N26)
- 13 64 501 Removing and installing/replacing a fuel injector (N52T)
- 13 53 192 Removing and installing/replacing a pressure line (Bosch high-pressure pump) (N55)
- 13 53 192 Removing and installing/replacing a pressure line (Continental high-pressure pump) (N55)
- 13 53 315 Removing and installing/replacing all injectors in fuel injection system (N47 D20 O1)
- 13 53 310 Removing and installing/replacing an injector (N55)
- 13 53... Removing and installing/replacing an injector N55 up to engine number 14407684 (bottom hold-down device version)
- 13 53 332 Removing and installing/replacing feed line (Bosch high pressure pump) (N55)
- 13 53 332 Removing and installing/replacing feed line (Continental high pressure pump) (N55)
- 13 53 332 Removing and installing/replacing feed line (N20)
- 13 53 158 Removing and installing/replacing pressure accumulator of fuel injection system (N47 D20 O1)
- 13 53 334 Removing and installing/replacing pressure line (Bosch high-pressure pump) (N55)
- 13 53 334 Removing and installing/replacing pressure line (Continental high pressure pump) (N55)
- 13 53 334 Removing and installing/replacing pressure line between rail and high pressure pump (N20)
- 13 53 170 Removing and installing/replacing pressure lines to the injectors (N47 D20 O1)
- 13 53 560 Removing and installing/replacing pressure sensor on pressure accumulator of injection system (N47 D20 O1)
- 13 53 158 Removing and installing/replacing rail (Bosch high pressure pump) (N55)
- 13 53 158 Removing and installing/replacing rail (Continental high-pressure pump) (N55)
- 13 53 158 Removing and installing/replacing rail (N20, N26)
- 13 53 240 Replacing complete fuel injection pipe (N52T)
- 13 53 596 Replacing high pressure fuel sensor (N20)
- 13 53 596 Replacing high-pressure fuel sensor (N55)
- 13 53 330 Replacing leakage oil lines (N47 D20 O1)
- 13 53 180 Replacing pressure line between high pressure pump and pressure accumulator (N47 D20 O1)
- 13 53 570 Replacing pressure regulator on pressure accumulator of fuel injection system (N47 D20 O1)
- 13 53... Warnings for the removal of injectors (N55)
- Throttle And Operation
- 13 54 250 Removing and installing/replacing air intake hose on air filter housing (N52T)
- 13 54 251 Removing and installing/replacing air intake hose on throttle body (N52T)
- 13 54 030 Removing and installing/sealing throttle body (N47 D20 O1)
- 13 54 030 Removing and installing/sealing throttle body (N52T)
- 13 54 030 Removing and installing/sealing throttle body (N55)
- 13 54 030 Removing and installing/sealing throttle valve assembly (N20, N26)
- 11 61 365 Removing and installing/replacing left-hand charge air duct (N20)
- 11 61 368 Removing and installing/replacing left-hand charge air duct (N55)
- 11 61 362 Removing and installing/replacing right charge air line (N20, N26)
- Electronic Control Unit
- Sensor For Control Unit
- 13 62 511 Removing and installing/replacing charge-air temperature sensor (N47 D20 O 1)
- 13 62 010 Removing and installing/replacing differential pressure sensor (N52T)
- 13 62 560 Removing and installing/replacing hot film air mass meter (N20)
- 13 62 560 Removing and installing/replacing hot film air mass meter (N47 D20 O1)
- 13 62 560 Removing and installing/replacing hot film air mass meter (N52T)
- 13 62 560 Removing and installing/replacing hot film air mass meter (N55)
- 13 62 582 Removing and installing/replacing oil temperature sensor (N55)
- 13 62 651 Removing/replacing oxygen sensor (N47 D20 O1)
- 13 62 585 Replace the exhaust pressure sensor on the exhaust turbocharger (N47 D20 O1)
- 13 62 650 Replacing camshaft pulse generator (N47 D20 O1)
- 13 62 535 Replacing charging pressure sensor (N47 D20 O1)
- 13 62 531 Replace coolant temperature sensor (N20, N26)
- 13 62 531 Replacing coolant temperature sensor (N47 D20 O1)
- 13 62 531 Replacing coolant temperature sensor (N52T)
- 13 62 531 Replacing coolant temperature sensor (N55)
- 13 62 610 Replacing crankshaft pulse generator (N47 D20 O1)
- 13 62 651 Replacing exhaust backpressure sensor (N47 D20 O1)
- 13 62 534 Replacing exhaust-gas temperature sensor (N47 D20 O1)
- Start Valves
- 13 64 501 Removing and installing/replacing a fuel injector (N52T)
- 13 53... Remove, install replace one injector N55 as from engine number 14407685 (hold-down device concept at the top)
- 13 53 310 Removing and installing/replacing an injector (N55)
- 13 53... Removing and installing/replacing an injector N55 up to engine number 14407684 (bottom hold-down device version)
- 13 53... Warnings for the removal of injectors (N55)
- Intake Silencer
- 13 71 155 Remove clean air pipe (N20)
- 13 71 150 Removing clean air pipe (N47 D20 O1)
- 13 71 150 Removing clean air pipe (N55)
- 13 71 170 Removing air duct (N55)
- 13 71 000 Removing and installing/replacing intake silencer housing (N20)
- 13 71 000 Removing and installing/replacing intake silencer housing (N52T)
- 13 71 000 Removing and installing/replacing intake silencer housing (N55)
- 13 71 000 Removing/replacing intake silencer housing (N47 D20 O1)
- 13 71 000 Replacing air filter element (N47 D20 O1)
- 13 71 165 Removing bottom clean air pipe (N20)
- 13..... Removing intake port (N47 D20 O1)
- Air Cleaner
- Carbon Canister Ventilation