Engine - Repair - F30 (1 Of 4)
- Engine, General
- 11 00 039 Checking compression of all cylinders (N20, N26)
- 11 00 039 Checking compression of all cylinders (N55 hybrid)
- 11 00 039 Checking compression of all cylinders (N55)
- 31 10 001 Completely removing and installing complete front axle with engine and transmission (N55 automatic transmission with four-wheel drive)
- 31 10 001 Completely removing and installing front axle with engine and transmission (N55)
- 31 10 001 Completely removing and installing front axle with engine and transmission (N55 automatic transmission)
- 31 10 001 Completely removing and installing front axle with engine and transmission (N55 hybrid car)
- 00 Danger of poisoning if oil is ingested/absorbed through the skin
- 11 00 000 Differences among engine block versions (N47)
- Engine identification
- 11 00.. Engine oil change (N47 D20 1)
- 11 00 300 Engine oil consumption measurement
- 11 00.. Engine oil service (N20, N26)
- 11.....Equipment recoding special tool number of the transverse member for fixing the engine in the installation location
- 11 00.. Handling components after flood damage
- 11 00 091 Installing replacement engine (N47T)
- Mounting engine on assembly stand (N47 D20 O1)
- 11 00 Mounting engine on assembly stand (N55)
- 11 00 Mounting the engine on the assembly stand (N20, N26)
- 11 00.. Overview of consumables
- 11 00 050 Remove and install the engine (N47D20 K/U/O/T 1)
- 31 10 001 Removing and installing complete front axle with engine and transmission (N55 four-wheel drive)
- 11 00 050 Removing and installing engine (N20, N26)
- 11 00 050 Removing and installing engine (N55 hybrid car)
- 11 00 050 Removing and installing engine (N55)
- 11 12 070 Removing and installing/renewing acoustic cover (B58)
- 11 12 090 Removing and installing/renewing acoustic cover (N20)
- 11 12 090 Removing and installing/renewing acoustic cover (N26)
- 11 00.. Removing and installing/replacing rear acoustic cover (corrosion protection) (B58)
- 00 Risk of injury if oil comes into contact with eyes and skin
- 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
- 00 Safety instructions for handling oil
- 11 00 670 Secure engine in installation position (N55)
- 11 00 670 Secure Engine In Installation Position (N20, N26)
- 11 00 670 Securing the engine in the installation position (N55 Hybrid)
- 11 00.. Service - engine oil (N55)
- 11 00.. Service engine oil (N55 hybrid)
- Engine Block
- Cylinder Head And Cylinder Head Cover
- 11 12 729 Checking cylinder head for water leaks (N55)
- 11 12 729 Checking cylinder head for watertightness (N20, N26)
- 11 12 729 Checking cylinder head for watertightness (N55 hybrid)
- 11 12 729 Checking the cylinder head for watertightness (N47D20 K/U/O/T 1)
- 11 12 800 Cleaning cylinder heat intake channels and intake plenum (N47, N57)
- 11 12 719 Milling cylinder head lower face (N20, N26)
- 11 12 040 Removing and installing all ignition coil and injector wells (N55 Hybrid)
- 11 12 040 Removing and installing all ignition coils and injector wells (N20, N26)
- 11 12 040 Removing and installing all ignition coils and injector wells (N55)
- 11 12 100 Removing and installing cylinder head (N20, 26)
- 11 12 100 Removing and installing cylinder head (N47D20 K/U/O/T 1)
- 11 12 100 Removing and installing cylinder head (N55)
- 11 12 100 Removing and installing cylinder head (N55, hybrid)
- 11 12 070 Removing and installing/renewing acoustic cover (B58)
- 11 12 090 Removing and installing/renewing acoustic cover (N20)
- 11 12 090 Removing and installing/renewing acoustic cover (N26)
- 34 33 200 Removing and installing/replacing electric vacuum pump
- 11 12 000 Removing and installing/sealing cylinder head cover (N20, N26)
- 11 12 000 Removing and installing/sealing cylinder head cover (N47D20 K/U/O/T 1)
- 11 12 000 Removing and installing/sealing cylinder head cover (N55 hybrid)
- 11 12 000 Removing and installing/sealing cylinder head cover (N55)
- 11 12 101 Replacing cylinder head gasket (N20, N26)
- 11 12 501 Replacing cylinder head gasket (N47D20 K/U/O/T 1)
- 11 12 101 Replacing cylinder head gasket (N55 hybrid)
- 11 12 101 Replacing cylinder head gasket (N55)
- 11 12 719 Resurfacing cylinder head lower face (N55 hybrid)
- 11 12 719 Resurfacing cylinder head lower face (N55)
- Oil Sump
- 11 13 000 Removing and fitting, sealing or replacing the oil sump (N20 all-wheel drive vehicle)
- 11 13 000 Removing and installing, sealing or replacing oil sump (N20, N26)
- 11 13 000 Removing and installing, sealing or replacing oil sump (N47D20 K/U/O/T 1)
- 11 13 000 Removing and installing, sealing or replacing oil sump (N55 hybrid)
- 11 13 000 Removing and installing, sealing or replacing oil sump (N55)