Stability Control System - Functional Description -- F07
- Stability Control System - Functional Description
- Dynamic Stability Control
- Notes
- Diagnosis instructions
- Introduction
- Dynamic Stability Control
- Brief component description
- DSC unit
- 4 wheel speed sensors
- Steering angle sensor
- DTC button
- Parking brake button
- Brake fluid level switch
- Brake light switch
- 2 brake pad wear sensors
- System functions
- Brake standby through application at an early stage of the brake pads when required
- Dry braking of the brake discs on wet roadways
- Fading Brake Support
- Drive-off assistant
- Cruise control with brake function
- Trailer Stability Control
- Notes for Service department
- Integrated chassis management
- Single-Axle Air Suspension
- Vertical Dynamics Management (VDM)
- Notes
- Brief component description
- Valve block
- Structure and inner electrical connection
- Failure of the component
- Active anti-roll bars
- Tandem pump
- Suction throttle valve
- Function of suction throttle valve
- Characteristic curve and setpoint values for tandem pump
- Oil reservoir and oil-level switch
- Characteristic curve for filter element as well as bypass valve and setpoint values
- General notes
- Oil cooler
- Notes for Service department
- Diagnosis instructions
- Notice! Temperature on commissioning
- Information on encoding and programming
- Information on Check Control messages
- Message: Steering fault! Stop the vehicle carefully
- Message: Restricted cornering behavior!
- Dynamic Stability Control