Rules Of Conduct/Protective Measures

Note operating instructions for handling high-voltage battery units.

• Do not under any circumstances touch open high-voltage cables and high-voltage components on damaged vehicle before shutting down the high-voltage electrical system.
• In the event of damage (mechanical, thermal) transition metal oxides, carbon, electrolyte solvents and their products of decomposition may be released. Suitable acid-resistant protective gloves and safety goggles must therefore be used when handling the vehicle.
• Damaged high-voltage battery units must be stored in an acid-resistant pan in a location in the open that is protected against the weather (sun, rain) and secured against unauthorised access. Do not inhale escaping gasses.
• Prevent escaping substances from entering drains, pits and the sewer system.
• Collect any material that is discharged and have it disposed of according to the work instruction, wear acid-resistant protective clothing when doing so.
• Notify the fire department if fire breaks out, clear the area immediately and make accident scene safe. Attempt to extinguish the fire without putting persons in danger (suitable extinguishant: water and water foam).