Engine Electrical System - Repair -- ACTIVEHYBRID 7

• Safety And General Information
  • 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
  • (61 00... Safety information on handling hybrid cars)
  • (61 25 900 Disconnecting high-voltage system from power)
  • (61 00... Notes for disconnecting and connecting battery)
  • (61 20... Battery replacement information)
  • (61 13... Butt connector for repairing a plug connection)
  • 11 00... Handling components after flood damage
  • 12 00... Instructions for removal and replacement of control units
  • 12 00... Instructions for working on the ignition system
  • (61 13... Notes for opening contacts and locks of different plug contact systems)
  • (61 00... Notes on handling wiring harnesses and cables)
  • 12 00... Notes/information on start assistance (jump starting)
  • 12 00 Removing and installing/replacing the ignition coil cover (N55 Hybrid)
  • (61 13... Unlocking and disconnecting various plug connections in hybrid vehicles)
• Ignition Wires, Spark Plugs
  • 12 12 011 Removing and installing/replacing all spark plugs (N55 hybrid)
• Ignition Coil
  • 12 13 511 Replacing ignition coils (N55 hybrid)
• Electronic Switching Or Control Units
  • 12 14 700 Encoding the control unit (DME)
  • 12 14 705 Programming the control unit (DME)
  • 12 14 600 Removing/replacing knock sensors (N55 Hybrid)
  • 12 14 550 Replacing control unit (DME) (N55 Hybrid)
  • 12 14 521 Replacing crankshaft pulse sensor (N55 hybrid)
  • 12 14 650 Replacing intake plenum (N55 Hybrid)
  • 12 14 524 Replacing pulse sensor on exhaust camshaft (N55 Hybrid)
  • 12 14 523 Replacing the pulse sensor on the intake camshaft (N55 Hybrid)
• Alternator With Drive And Mounting
  • 12 31 022 Removing and installing or replacing starter motor generator (N55 Hybrid)
• Electrical Machines
  • 12 35 005 Remove/install/replace electric machine
  • 12 35 010 Removing and installing/replacing torsional vibration damper (electrical machine)
• Control Units, Electric Machines
  • 12 36 014 Removing and refitting/replacing electric motor ECU
• Starter With Mounting
  • 12 41 020 Removing and installing/replacing the starter motor (N55 Hybrid)
  • 12 41 041 Replacing the engagement solenoid switch
• Starter Lead
  • 12 42 600 Replacing positive battery cable between alternator and positive battery connection point (N55 Hybrid)
  • 12 42 605 Replacing positive battery cable between starter motor, E machine electronics and positive battery connection point (N55 Hybrid)
  • 12 42 540 Replacing safety battery terminal (SBK)
• Engine Wiring Loom
  • 12 51 001 Replacing wiring harness section for engine (N55 Hybrid)
  • 12 51 100 Replacing wiring harness section for ignition and injectors (N55 Hybrid)
• Oil Pressure/Oil Temperature/Oil Gauge
  • 12 61 285 Removing and installing/replacing oil level sensor for engine oil (N55 hybrid)
  • 12 61 280 Removing and installing/replacing oil pressure sensor (N55 Hybrid)
• Switches And Relays
  • 12 63 586 Replacing power distribution module (N55 Hybrid)