11 11 Engine block
TIGHTENING TORQUE SPECIFICATION - ENGINE BLOCK
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bearing cap to crankcase (ASA collar bolt) | N63 O1 | M11x99 | Replace bolts, screw in hand-tight | |
| Jointing torque | 20 Nm | |||
| Angle of rotation | 115 ° | |||
| 2AZ Bearing cap to crankcase (ASA collar bolt 10.9) | N63 O1 | M8x70 | Replace screws. | |
| Jointing torque | 10 Nm | |||
| Angle of rotation | 55 ° | |||
| 3AZ Threaded support sleeves | N63 O1 | Jointing torque | 6 Nm | |
| 4AZ Angled screw connection to crankcase | N63 O1 | M8x37 | Flanged head screw 10.9 | |
| Jointing torque | 10 Nm | |||
| Angle of rotation | 45 ° | |||
| 5AZ Screw plug, gutter strip | N63 O1 | M14x1.5 | Replace gasket. | 25 Nm |
| 6AZ Screw plug, main oil gallery rear and in V-space right | N63 O1 | M18x1.5 | Replace gasket. | 25 Nm |
| 7AZ Oil nozzle to crankcase | N63 O1 | M12x1 | 10 Nm | |
| 8AZ Special tool to crankcase | N63 O1 | M8x35 | 20 Nm | |
| 9AZ Special tool to crankcase | N63 O1 | M10x35 | 40 Nm | |
| 10AZ Special tool 11 8 930 to special tool 00 2 300 | N63 O1 | M14x35 | 160 Nm | |