22 11... Repair instructions for broken engine mounting bracket/engine mount screw connection
WARNING:
High-voltage system - danger to life!
The following points must be strictly observed prior to starting work and during work:
The following points must be strictly observed prior to starting work and during work:
- Observe SAFETY INFORMATION for working with electric vehicles.
The following work must be performed when the engine mount screw connection or the engine mounting bracket is broken.
- Renew LEFT AND RIGHT SUPPORT BEARINGS INCL. SCREW CONNECTION
- Renew left and right mounting brackets. See MOUNTING BRACKET OF ELECTRICAL MACHINE WITH RANGE EXTENDER and TRANSMISSION MOUNTING BRACKET OF RANGE EXTENDER , or REPLACING TRANSMISSION BEARING BLOCK .
- Renew left and right output shaft. See REPLACING LEFT OUTPUT SHAFT or REPLACING RIGHT OUTPUT SHAFT
- Renew A/C LINES
- Check the HIGH-VOLTAGE CABLE under the drive shaft sleeve and renew it in the event of damage
- Check the BRACING STRUT for paintwork damage and apply corrosion protection to potentially damaged areas of the paintwork
- Check BATTERY VOLTAGE LINE in the area of the iso-fix strip for damage and renew if necessary.
- Program the vehicle to integration level version I001-15-11-501 (from ISTA/P3.57.0)
- Check fuel lines (1) for damage.
Renew damaged fuel lines.