Engine - General/Mounting/Compression Check - Repair (G20)

• 11 00 Engine
  • Handling components after flood damage (330i xDrive, 330e PHEV, 330e xDrive PHEV, M340i and M340i xDrive)
  • Motor oil consumption measurement (330i xDrive, 330e PHEV, 330e xDrive PHEV, M340i and M340i xDrive)
  • Overview of consumables (applicable BMW parts catalogue) (330i xDrive, 330e PHEV, 330e xDrive PHEV, M340i and M340i xDrive)
  • 11 00 039 Check compression of all cylinders (330i and 330i xDrive)
    • Check compression of all cylinders
  • 11 00 050 Removing and installing engine (330i)
    • Removing engine
    • Installing the engine
    • Repair notes for cylinder head or engine replacement (4-cyl.)
  • 11 00 670 Securing engine in installation position (330i)
    • Move the engine to the installation position
    • Removing the engine from the installation position
  • 11 00 682 Checking all cylinders for loss of pressure (after vehicle diagnosis) (330i and 330i xDrive)
    • Checking all cylinders for loss of pressure
  • Commissioning the oil circuit (330i xDrive, 330e PHEV, 330e xDrive PHEV, M340i and M340i xDrive)
  • Engine identification (330i xDrive, 330e PHEV, 330e xDrive PHEV, M340i and M340i xDrive)
  • 11 00 050 Removing and installing engine (330i xDrive)
    • Removing engine
    • Installing the engine
  • 11 00 670 Securing engine in installation position (330i xDrive)
    • Move the engine to the installation position
    • Take engine out of installation orientation
  • 11 00 050 Removing and installing engine (330e PHEV)
    • Removing the engine
    • Installing the engine
  • 11 00 670 Securing engine in installation position (330e PHEV)
    • Move the engine to the installation position
    • Removing the engine from the installation position
  • 11 00 682 Checking all cylinders for loss of pressure (after vehicle diagnosis) (330e PHEV and 330e xDrive PHEV)
    • Checking all cylinders for loss of pressure
  • 11 00 050 Removing and installing engine (330e xDrive PHEV)
    • Removing engine
    • Installing the engine
  • 11 00 670 Securing engine in installation position (330e xDrive PHEV)
    • Moving the engine to the installation position
    • Take engine out of installation orientation
  • 11 00 039 Check compression of all cylinders (M340i and M340i xDrive)
    • Check compression of all cylinders
  • 11 00 598 Remove and install the engine on the front axle (M340i)
    • Removing the engine from the front subframe
    • Attaching the engine on the front subframe
    • Repair notes for cylinder head or engine replacement (6-cyl.)
  • 11 00 670 Securing engine in installation position (M340i)
    • Move the engine to the installation position
    • Removing the engine from the installation position
  • 11 00 682 Checking all cylinders for loss of pressure (after vehicle diagnosis) (M340i and M340i xDrive)
    • Checking all cylinders for loss of pressure
  • 11 00 598 Remove and install the engine on the front axle (M340i xDrive)
    • Removing the engine from the front subframe
    • Attaching the engine on the front subframe
  • 11 00 670 Securing engine in installation position (M340i xDrive)
    • Move the engine to the mounting orientation
    • Take engine out of installation orientation