11 13 Oil Pan
N55 ENGINE (2016-2018):
11 13 OIL SUMP - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Oil drain plug to oil sump | N55 | M12x1.5 | Replace sealing ring. | 25 Nm |
| 2AZ Oil sump (aluminium) to crankcase lower half. | N55 | M8x26 | Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque Angle of rotation |
8 Nm 90° |
| 3AZ Oil sump (aluminium) to crankcase lower half. | N55 | M8x92 M8x112 |
Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque Angle of rotation |
8 Nm 180° |
| 4AZ Oil sump (aluminium) to crankcase lower half (AWD) | N55 | M8x36 | Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque Angle of rotation |
8 Nm 90° |
| 5AZ Oil deflector to crankcase lower half. | N55 | M6x20 | Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque Angle of rotation |
4 Nm 90° |
| 6AZ Transmission to oil sump. | N55 | M8x50 8.8 | 19 Nm | |
| 7AZ Oil level sensor to oil sump. | N55 | M6 | 8 Nm |
S55 ENGINE (2019-2022):
11 13 OIL SUMP - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Oil drain plug to magnesium oil sump. | S55 | M16x1.5 | Replace screw with sealing ring. | 20 Nm |
| 1AZ Oil drain plug on aluminium oil sump. | S55 | M12x1.5 | Replace sealing ring. | 25 Nm |
| 2AZ Oil sump (magnesium) to lower section of crankcase. | S55 | M8x26 | Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque |
8 Nm |
| Angle of rotation | 60° | |||
| 3AZ Oil sump (aluminium) to crankcase lower half. | S55 | M8x92 M8x112 |
Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Compliance with jointing torque and angle of rotation is absolutely mandatory |
|
| Jointing torque | 8 Nm | |||
| Angle of rotation | 180° | |||
| 4AZ Magnesium oil sump cover | S55 | M6x16 | Replace screw. | 8 Nm |
| 5AZ Transmission to oil sump. | S55 | M8x50 | Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Compliance with jointing torque and angle of rotation is absolutely mandatory |
|
| Jointing torque | 4 Nm | |||
| Angle of rotation | 100° | |||
| 6AZ Oil level sensor to oil sump. | S55 | M6 | Replace screw. Thread repairs exclusively with aluminium Helicoil threaded insert. Compliance with jointing torque and angle of rotation is absolutely mandatory |
|
| Jointing torque | 4 Nm | |||
| Angle of rotation | 100° |