11 00 Engine
11 00 STANDARD SCREW CONNECTION - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Screws and nuts | M5 | 5 Nm ± 0.5 | ||
| 2AZ Screws and nuts | M6 | 8 Nm ±±1 | ||
| 3AZ Screws and nuts | M7 | 13 Nm±2 | ||
| 4AZ Screws and nuts | M8 | 19 Nm±3 | ||
| 5AZ Screws and nuts | M10 | 38 Nm±5 | ||
| 6AZ Hose clamp, WAF 5 | 1.0 to 1.5 Nm | |||
| 7AZ Hose clamp, WAF 6 | 2.5 up to3.5 Nm |
11 00 TIGHTENING TORQUE OVERVIEW
| Engine mounting bracket on assembly jig | ||
|---|---|---|
| M14x95 | Tightening torque | 130 Nm |
| Engine mount to engine mounting bracket | ||
| Hexagon screws from special tool set | Tightening torque | 105 Nm |
| Motor mount on the engine stand | ||
| M10 | Tightening torque | 100 Nm |
| Standard screw connection 4 Nm | ||
| Oval-head screw | Tightening torque | 4 Nm |
| Standard screw connection hose clamp 5 | ||
| Hose clamp L12 - L15 | tightening torque | 1.25 Nm |
| Standard screw connectionM10 | ||
| M10 | 38 Nm | |
| Standard screw connectionM5 | ||
| M5 | 5 Nm | |
| Standard screw connectionM6 | ||
| M6 | tightening torque | 8 Nm |
| Standard screw connectionM7 | ||
| M7 | 13 Nm | |
| Standard screw connectionM8 | ||
| M8 | tightening torque | 19 Nm |