Control Arm: Remove & Replace
DOES NOT include alignment.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Camber Arm,Lower,Both | 2.8 | B | ||
| Camber Arm,Lower,One Side | 1.6 | B | ||
| Wishbone,Lower,Rear,Both | 1.0 | B | ||
| Wishbone,Lower,Rear,One Side | 0.6 | B | ||
| Wishbone,Upper,Front,Both | 2.0 | B | ||
| Wishbone,Upper,Front,One Side | 1.1 | B | ||
| Wishbone,Upper,Rear,Both | 5.3 | B | ||
| Wishbone,Upper,Rear,One Side | 4.5 | B | ||
| Combination Procedure: CONTROL ARM BUSHING: Replace: | ||||
| Each | 0.4 | B | ||