Control Arm: Remove & Replace
WARNING: This page is about the M3 Base, Automatic Trans, which is a different variant/trim than selected.
DOES NOT include alignment.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Lower,Tension Strut,Both | 3.0 | B | ||
| Lower,Tension Strut,One Side | 1.8 | B | ||
| Lower,Wishbone,Both Sides | 2.4 | B | ||
| Lower,Wishbone,One Side | 1.5 | B | ||
| Combination Procedure: BALL JOINT: Remove & Replace: | ||||
| Each | 0.4 | B | ||
| Combination Procedure: CONTROL ARM BUSHING: Remove & Replace: | ||||
| Each | 0.4 | B | ||