1111 Engine Block
1111 TIGHTENING TORQUE OVERVIEW
| Stud bolt on cylinder head | ||
| M7X58 | Tightening torque | 12 Nm |
| Special tool 11 8 930 to special tool 00 2 320 | ||
| M14x35 | Tightening torque | 60 Nm |
| Main bearing cap to crankcase | ||
| M10x85 11.9 Replace screws. |
1. Tightening torque | 25 Nm |
| 2. Angle of rotation | 65° | |
| 3. Angle of rotation | 65° | |
| Special tool 2 413 082 to special tool 00 2 320 | ||
| M12x65 | Tightening torque | 100 Nm |