1141 Engine Oil Pump
1141 TIGHTENING TORQUE OVERVIEW
| Cover on oil vacuum pump | ||
| M6X20 | tightening torque | 8 Nm |
| Oil vacuum pump to crankcase | ||
| M8 Replace screw. |
1. Joining torque | 15 Nm |
| 2. Angle of rotation | 45° | |
| Sprocket wheel at the oil vacuum pump | ||
| M8 Important - left-hand thread Replace screw. |
1. Joining torque | 5 Nm |
| 2. Angle of rotation | 90° | |
| Sprocket wheel cover on oil vacuum pump | ||
| M6X20 | tightening torque | 8 Nm |
| Hydraulic valve to crankcase | ||
| M6x18 | tightening torque | 8.5 Nm |