Removal & Installation
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 5.2 | C | |||
| Combination Procedure: FRONT DRIVE CHAIN: Remove & Replace: | ||||
| Includes: Replace All Gaskets and Seals. | 2.0 | A | ||
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: OUTPUT FLANGE SEAL: Remove & Replace: | ||||
| Front | 0.2 | B | ||
| Rear | 0.3 | B | ||
| Combination Procedure: SHAFT SEAL: Remove & Replace: | ||||
| Actuator | 0.3 | B | ||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Replace: | ||||
| 0.6 | C | |||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Reseal: | ||||
| Includes: Replace All Seals and O-Rings only. | 0.9 | B | ||