Output Displays
When trouble shooting a malfunction, the ECM and BCM output cycling can be actuated regardless of the inputs and normal program instructions. Once a test in outputs is selected, except for ECM IAC, the test will display "HI" or "LO" for 3 seconds in each state indicating the command and output terminal voltage.
BCM OUTPUT DISPLAY CODES
| Code | Circuit Affected |
|---|---|
| BO00 | No Outputs |
| BO01 | Cruise Control Vent Solenoid |
| BO02 | Cruise Control Vacuum Solenoid |
| BO03 | Retained Accessory Power |
| BO04 | Courtesy Relay |
| BO05 | Twilight Relays |
| BO06 | High/Low Beam Relays (Reatta & Riviera) |
| BO10 | Chime 1 |
| BO11 | Chime 2 |
| BO12 | Fog Light (Reatta only) |
| BO13 | Parking Lights (Reatta & Riviera) |