Front Door Latch Module Assembly: Removal
- Remove door trim panel. See DOOR TRIM PANEL .
- Move upper half of water deflector to gain access.
- Remove rear glass run channel retainer and screw. See REAR WINDOW RUN CHANNEL RETAINER .
- Remove rivets (72) using a 1/4" drill bit. See Figure .
- Remove screws (74).
- Remove outside door handle rod (67) from door latch (70).
- Remove lock cylinder rod (71) from door latch (70).
- Disconnect wire harness from lock actuator connector.
- Remove door latch module assembly (73).