LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 1993 >> Roadmaster Base >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Testing >> Test 3 >> With Power Window Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With Power Window Control Module

  1. Disconnect right front window switch connector. With ignition switch in RUN position, connect a test light between right front window switch Dark Blue/White wire connector terminal and Tan wire connector terminal. Press right front window switch (on master switch) upward then downward.
  2. If light comes on in both directions, go to step 3). If light does not comes on in both directions, check for open in Dark Blue/White and Tan wires between master switch and right front window switch. If wires are okay, replace master switch.
  3. Connect a jumper wire between right front window switch connector Dark Blue/White wire and Dark Blue wire (going to right front window motor). Connect a jumper wire between right front window switch connector Tan wire and Brown wire.
  4. Press right front window switch (on master switch) up and down. If window motor operates, replace right front window switch. If window motor does not operate, check for open in Dark Blue and Brown wires between right front window switch and right front window motor. If wires are okay, replace motor.