Code P0118, Coolant Temp Sensor High Temperature Indicated: Notes

ECT sensor uses a thermistor to control signal voltage to PCM. PCM applies and monitors a 5 volts to ECT sensor. When engine coolant is cold, sensor (thermistor) resistance is high and PCM will sense a high signal voltage. As engine coolant warms up, sensor resistance becomes less and PCM voltage drops. With Code P0118 set, PCM will turn cooling fans on and use a default engine coolant temperature value based on run time. PCM will illuminate Malfunction Indicator Light (MIL).

1. Code 15 reference applies to 5.7L only. This step determines if conditions necessary to set Code P0118 exist.
2. This test will determine if signal circuit is shorted to ground which will cause conditions for Code P0118.
3. This test will determine if circuit is open. If circuits are okay, check connections at PCM and ECT sensor.