System Check
- Place shift lever in Park position. Turn lock cylinder to OFF-LOCK position. Remove key. If lock cylinder cannot be turned to OFF-LOCK position or key cannot be removed, perform appropriate ADJUSTMENT procedure.
- With lock cylinder in OFF-LOCK position, try to move shift lever out of Park. If shift lever can be moved out of Park, perform appropriate ADJUSTMENT procedure.
- Turn lock cylinder to RUN position. Try to move shift lever out of Park. If shift lever can be moved out of Park, perform appropriate ADJUSTMENT procedure.
- Try to turn lock cylinder to OFF-LOCK position. Ignition switch should stop turning before reaching the OFF-LOCK position, and the key should not be able to be removed. If system does not operate as specified, perform appropriate ADJUSTMENT procedure.
- With key in same position as in previous step (just before OFF-LOCK position), place shift lever in Park position. Turn lock cylinder toward RUN position, and then to OFF-LOCK position. Remove key. Insert key. If system does not operate as specified, perform appropriate ADJUSTMENT procedure.