Removal & Installation
WARNING: This page is about the Century Special, 4D Sedan, 2.2 4, which is a different variant/trim than selected.
TRANS ID - 125, 125C, 3T40
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| In-Line4 | | 6.0 | | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | 0.2 | C |
| Combination Procedure: CONVERTER BUSHING & SEAL: Remove & Replace: |
| | 0.3 | | B |
| Combination Procedure: CONVERTER SEAL: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | 0.2 | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| | 1.0 | | C |
TRANS ID - 440T4, 4T60, 4T60E, 4T65E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| | 7.0 | | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | | C |
| Combination Procedure: CONVERTER BUSHING & SEAL: Remove & Replace: |
| | 0.3 | | B |
| Combination Procedure: CONVERTER SEAL: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| | 1.0 | | C |