Code 66: A/C Pressure Sensor: Notes

A/C pressure sensor responds to changes in A/C refrigerant system high side pressure. PCM uses A/C compressor load input to determine engine idle speed. Sensor uses a 5-volt reference signal from PCM and returns an input signal to PCM on a separate line. Low pressure (zero psi) will return a signal of about .1 volt. High pressure will return a signal of about 4.9 volts. The PCM will disable the compressor clutch if Code 66 is current.

1. Checks voltage signal from A/C pressure sensor to PCM.
2. Checks to see if high signal is from a shorted sensor or a short to voltage in circuit. Normally, disconnecting sensor would make a normal circuit go to nearly zero volts.
3. Checks to see if low voltage signal is from sensor or circuit. Jumpering sensor signal circuit to 5-volt reference checks circuit, connections and PCM.
4. Checks to see if low voltage signal was due to an open in sensor circuit or 5-volt reference circuit; previous step eliminated pressure sensor as a possible cause.