Mode F3 (ABS Snapshot)

Mode helps isolate intermittent problems by capturing data before and after fault condition.

If MANUAL TRIGGER mode is selected, Tech 1 will wait for ENTER to be pressed before storing speed sensor information. All stored information can be displayed and examined for conditions which might indicate a problem.

If AUTOMATIC TRIGGER mode is selected, Tech 1 will capture data which deviates from normal conditions but may not set a DTC, such as driving over bumpy roads or railroad tracks. Condition may be caused by loose connections or intermittent wiring problems. While Tech 1 is waiting for a trigger, ENTER or F9 key may be used to force a trigger.