LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 1996 >> Roadmaster Base >> Repair and Diagnosis >> Steering >> Steering Column >> Adjustments >> Sir Coil Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sir Coil Assembly

NOTE: If coil assembly hub or steering shaft were rotated after assembly was removed, use the following procedure to center coil ribbon before installing assembly. A new coil ribbon does not require centering, as it is already centered and held in position with a plastic tab. Remove tab after coil assembly is installed.
  1. Hold coil assembly with clear bottom upward to see coil ribbon. While holding coil assembly housing and pressing spring lock, rotate hub in direction of arrow (on bottom of assembly) until it stops. Coil assembly should now be wound up snug against center hub.
  2. Rotate coil assembly hub in opposite direction about 2 1/2 turns. Release spring lock between locking tabs in front of arrow. Coil assembly can now be installed if wheels are in straight-ahead position.
scientia non olet · About LEMON Manuals