Park Lock Cable: Notes
WARNING:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION section before disconnecting battery.
NOTE:
Not all models are equipped with a park lock cable. Park lock cable adjustment information for some models is not available from manufacturer.
- Remove center console to expose park lock cable connector lock. Place gearshift lever in Park. Turn ignition switch to LOCK position.
- Pull park lock cable connector lock button up to unlock. Push cable connector nose forward to remove slack. Snap park lock cable connector lock button down into place. Check park lock cable operation.
- Ensure ignition key can be removed with gearshift lever in Park only and gearshift lever cannot be moved from Park with ignition switch in LOCK position.