Manual Programming
- Sit in drivers seat and remove ignition key from ignition switch.
- Close all doors and press and hold UNLOCK button on door lock switch.
- While holding UNLOCK button on door lock switch, insert and remove ignition key from ignition switch 2 times. Do not turn ignition switch.
- Insert ignition key a third time. Leave ignition key in ignition switch and switch in LOCK position for remainder of programming.
- Release door lock switch. 3 chimes will be heard indicating transmitter programming is active.
- Press and hold LOCK and UNLOCK buttons at the same time on keyless entry transmitter for 12 seconds. Two chimes will be heard indicating transmitter has been successfully programmed.
- Repeat step 6 for up to 4 transmitters. To end procedure, remove ignition key from ignition switch.