Test F: Power Window Lockout Function Is Inoperative
- Turn the ignition switch to the LOCK position. Disconnect the left front window switch harness connector. Using a test light backprobe between the left front window switch harness connector C2 terminal A and ground. If test light illuminates, go to step 3. If test light does not illuminate, go to next step.
- Replace the left front window switch. See WINDOW SWITCH under REMOVAL & INSTALLATION. After repair has been made, go to POWER WINDOWS SYSTEM CHECK under TROUBLESHOOTING.
- Repair short to battery power in circuit 1307. After repair has been made, go to POWER WINDOWS SYSTEM CHECK under TROUBLESHOOTING.