Remote Unlock Control Customization
NOTE:
If ignition switch is turned to OFF position during customization procedure, customization will be terminated and system will remain in most recent mode.
- Sit in driver's seat. Close all vehicle doors. Turn switch ignition to RUN position.
- Depress and hold door lock switch to UNLOCK position. Depress transmitter UNLOCK button. Chime will sound 1-4 times, equal to current customization mode. Each additional time UNLOCK button is depressed, mode number will advance, repeating back to mode one from mode four. See REMOTE LOCK/UNLOCK VERIFICATION CUSTOMIZATION table.
- Release door lock switch from UNLOCK position when desired mode has been indicated by chime. Turn ignition off. Verify system operation.
NOTE:
GM Tech 2 scan tool or equivalent scan tool may be used to program Remote Unlock Verification. Follow screen prompts and instructions.