With Scan Tool
- Turn ignition switch to OFF position. Connect scan tool to Data Link Connector (DLC). DLC is located below left side of instrument panel, to right of steering column. See Figure . Turn ignition switch to RUN position.
- Using scan tool, select correct vehicle, model and year. Select BODY, then PERSONALIZATION. To program remote unlock verification mode, select SET OPTIONS, then F2. Highlight desired mode for following choices: NO UNLOCK VERIFICATION, HORN ONLY, DRL ONLY or DRL AND HORN. Press ENTER button to turn mode OFF or ON. Select SAVE OPTIONS.
- To program remote lock verification mode, select SET OPTIONS, then F3. Highlight desired mode for following choices: NO LOCK VERIFICATION, HORN ONLY, DRL ONLY or DRL AND HORN. Press ENTER button to turn mode OFF or ON. Select SAVE OPTIONS, then EXIT.
NOTE:
Current mode must be turned off before another mode can be turned on.