Without Scan Tool (Intrigue)
- Close all doors. Turn ignition switch to OFF position. Remove ignition key from ignition switch. Press and hold driver side door lock switch to UNLOCK position.
- Insert and remove ignition key twice (without turning lock cylinder). Insert ignition key a third time, leaving key in ignition switch in LOCK position. Release door lock switch. Body Control Module (BCM) will sound 3 chimes to verify program mode has been activated.
- Press and hold transmitter LOCK and UNLOCK buttons simultaneously for about 15 seconds. BCM will sound 3 chimes to verify that transmitter has been successfully programmed.
- Repeat step 3 for each transmitter to be programmed. To exit programming, remove ignition key. Verify system operation.