Installation Procedure
- Install a stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
- Install the air inlet grille in reverse of removal procedure.
- Install the windshield wipers arms and blades. Refer to WIPER ARMS .
- Install the windshield garnish molding in reverse of removal procedure.
- Install the rearview mirror. Refer to Rearview Mirror Replacement .
- Connect the rain sensor connector, if equipped.
- Connect the diversity antenna, if equipped.
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
- Close the hood.