30-Minute Learn Procedure
- Turn ignition on, with engine off.
- Attempt to start engine, then release key to ON position (vehicle will not start).
- Observe the SECURITY telltale, after about 10 minutes, the telltale will turn off.
- Turn ignition off, and wait 5 seconds.
- Repeat steps 1 - 4 two more times for a total of 3 cycles/30 minutes (the vehicle is now ready to relearn the Passlock™ Sensor Data Code and/or passwords on the next ignition switch transition from OFF to CRANK).
- Start engine (vehicle has now learned the Passlock™ Sensor Data Code and/or password).
- With scan tool, clear any DTCs, if needed (history DTCs will self clear after 100 ignition cycles).
NOTE:
The vehicle learns the Passlock™ Sensor Data Code and/or password on the next ignition switch transition from OFF to CRANK. You must turn the ignition off before attempting to start vehicle.