Traction Control Switch (Intrigue): Removal
- Raise the front floor center console armrest.
- Remove the 2 retainers that attach the front floor console trim plate to the front floor console. See Figure .
- Open the front floor console cupholder.
- Gently pull up on the front floor console trim plate to gain access to the traction control switch.
- Disconnect the traction control switch wiring harness connector from the traction control switch.
- Remove the traction control switch from the front floor console trim plate. To avoid damage to the front floor console trim plate, use a small flat-bladed tool on the back side of the traction control switch to release the retaining clips. See Figure .