DTC P0336: Crankshaft Position Sensor Performance: Description

The circuit uses 2 different types of Crankshaft Position (CKP) sensors. The CKP sensor "B" is connected directly to the Ignition Control Module (ICM), and consists of the following circuits:

• The CKP 1 sensor signal circuit.
• The low reference circuit.

The CKP sensor A connects directly to the Powertrain Control Module (PCM), and consists of the following circuits:

• The 12-volt reference circuit.
• The medium resolution engine speed signal circuit.
• The low reference circuit.

If the PCM detects an incorrect number of CKP pulses, DTC P0336 sets.