Test C: Charge Indicator Inoperative
- If diagnostic system check was not performed, perform ENGINE ELECTRICAL DIAGNOSTIC SYSTEM CHECK under ON-VEHICLE TESTING. If diagnostic system check was performed, go to next step.
- Turn ignition switch to RUN position. If battery charge indicator illuminates during 5 second bulb check, problem is intermittent. Check wiring and connections. If battery charge indicator does not illuminate during 5 second bulb check, go to next step.
- Replace Instrument Panel Cluster (IPC). See ANALOG INSTRUMENT PANELS article in ACCESSORIES & EQUIPMENT. Go to next step.
- Operate system to verify repair. If system is not operating correctly, repeat test beginning at step 2 .