Conditions For Running Test

DTCs P0102, P0103, P0107, P0108, P0121, P0122, P0123, P0401, P0403, P0404, P0405, P0440, P0442, P0443, P0446, P0449, P1404 or P1441 are not set.
The engine is running.
The ignition 1 signal is between 9-18 volts.
The TP sensor angle is less than 25 percent.
The change in the TP sensor angle is less than 1.5 percent.
The MAP sensor parameter is less than 63 kPa.
The change in the MAP sensor is less than 3 kPa.
The conditions are met for more than 5 seconds.