Piston Ring Set: Remove & Replace
WARNING: This page is about the Century Base, which is a different variant/trim than selected.
Includes: Remove carbon and Cylinder ridge, burnish Cylinders and replace Rod Bearings. Adjust Valves (where applicable).
DOES NOT include Pin fit and/or align.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| V6, All Cylinders | 15.1 | A | ||
| Combination Procedure: MAIN BEARINGS: Remove & Replace: | ||||
| V6, All | 2.5 | A | ||
| Combination Procedure: PISTON OR ROD PIN: Remove & Replace: DOES NOT include Pin fit and/or align. | ||||
| Each | 0.3 | 0.3 | A | |
| Combination Procedure: VALVE LIFTERS: Remove & Replace: | ||||
| V6 | 0.4 | B | ||
| Combination Procedure: VALVE LIFTERS (REMOVED): Clean: | ||||
| Each Additional | 0.1 | B | ||
| One | 0.2 | B | ||