Test B: Charge Indicator Always On
- If diagnostic system check was not performed, perform ENGINE ELECTRICAL DIAGNOSTIC SYSTEM CHECK under ON-VEHICLE TESTING. If diagnostic system check was performed, go to next step.
- Start engine. If battery charge indicator remains illuminated after 5 second bulb check, go to next step. If battery charge indicator does not remain illuminated after 5 second bulb check, problem is intermittent. Check wiring and connections.
- Install scan tool. Using scan tool, observe Battery Voltage parameter in Instrument Panel Cluster (IPC) data list. If voltage measures 10-15 volts, go to next step. If voltage does not measure 10-15 volts, perform TEST A: CHARGING SYSTEM TEST .
- Replace IPC. See ANALOG INSTRUMENT PANELS article in ACCESSORIES & EQUIPMENT. Go to next step.
- Operate system to verify repair. If system is not operating correctly, repeat test beginning at step 2 .