Fuel System Diagnosis: Description

When you turn the ignition switch to RUN position, the Powertrain Control Module (PCM) enables the fuel pump relay which powers the fuel pump ON. The fuel pump remains ON as long as the engine is cranking or running and the PCM receives ignition reference pulses. If there are no ignition reference pulses, the PCM shuts the fuel pump OFF within 2 seconds after the ignition was switched to the RUN position or if the engine stops.

The fuel tank stores the fuel supply. The electric fuel pump supplies fuel through an in-line fuel filter to the fuel injection system. The pump provides fuel at a higher rate of flow than is needed by the fuel injection system. The fuel pressure regulator maintains the correct fuel pressure to the fuel injection system. A separate pipe returns unused fuel to the fuel tank.